GENERAL DESCRIPTION
Sandstrom 28A Solid Film Lubricant is a lacquer-like
coating containing molybdenum disulfide and corrosion
inhibiting pigments. This Air Drying material prevents
corrosion, galling, seizing and fretting. It is a low-friction
coating which exhibits long wear life when operated at
-320oF to +500oF under loads exceeding 100,000 psi.
Sandstrom 28A should be applied where baking with
the longer wearing, heat cured #099, Sandstrom 9A or
LC-300 is not desirable.
Excellent Corrosion Protection without the use of toxic
heavy metals and the use of non-HAP solvents are its
outstanding characteristics.
Once Sandstrom 28A has been applied to a properly
prepared surface and allowed to cure, it is virtually unaffected
by atmospheric and fretting corrosion, solvents, acids, oils
and degreasers. Sandstrom 28A can be applied to all
metallic and non-metallic surfaces by spray application.
Complete application instructions are on page two of this
Technical Information Guide.
WEIGHT PER GALLON 9.90 + .2 lbs
(theoretical)
SOLIDS CONTENT 24% form 1 or 30
(by weight minimum) grams solids form 2
VOC 5.06 lbs/gallon
(theoretical)
VISCOSITY 15 to 25 seconds
(at 77oF) #2 EZ Zahn
OPERATING TEMP. RANGE -320OF to +300OF
FLUID RESISTANCE Pass
MIL-PRF-46147 Table 1 Immersion Fluids
MIL-L-23398 Table 3 Test Fluids
ASTM D2510 A&C (6 & 18 hour dry)
THERMAL STABILITY Pass
ASTM D2511
COLOR Flat Dark Gray
SHELF LIFE 1 year from date of shipment

上海比爾安達潤滑材料有限公司銷售比爾安達 231*521mm，針對比爾安達 231*521mm客戶提供相關咨詢服務，需要了解比爾安達 231*521mm型號尺寸、重量、價格、安裝、維護等資料請與我們聯(lián)系。

 

相關產(chǎn)品

 

 

公司簡介

 

其它地區(qū) 表面處理劑 類似信息：