• 規格：200L
• 品牌：德潤克
• 用途：冷卻潤滑防銹

Gear grinding oil/cutting oil (pure oil type)

——High efficiency lubrication, zero residue, and long service life for precision gear machining

1、 Product positioning

High precision gear grinding machine, spiral bevel gear machining, hard tooth surface gear precision milling and other scene designs are suitable for high-end manufacturing fields such as automotive gearbox gears, wind power gearboxes, robot reducers, etc., providing lubrication cooling rust prevention cleaning solutions.

2、 Product Features

1. Technological breakthroughs

Extreme pressure lubrication technology: adding molybdenum sulfide particles to form an anti-wear molecular film on the contact surface between the gear and the tool, reducing the friction coefficient by 40% and extending the tool life by more than 30%.

Dynamic thermal management: heat conduction formula, instantly absorbs processing heat, controls workpiece temperature rise ≤ 5 ℃, and avoids micro deformation of gears.

Zero residue formula: After processing, the oil film automatically evaporates and decomposes, leaving no residual carbonization layer and eliminating the need for secondary cleaning processes.

2. Environmental Protection and Safety

Low volatility: VOC emissions in the work area are less than 10ppm, ensuring the health of operators.

3. Increase efficiency and reduce costs

Extended oil change cycle: Improved antioxidant stability, with no performance degradation after 800 hours of continuous use.

Excellent compatibility: compatible with mainstream gear grinding models such as Gleason, KAPP, Qinchuan, etc.

3、 Technical parameters

Project parameter value testing standard

Kinematic viscosity (40 ℃) * * * mm 2/s ISO 3104

Flash point (opening) ≥ 180 ℃ ISO 2592

Pour point ≤ -18 ℃ ISO 3016

Emulsification resistance (40-37-3): Complete separation in 15 minutes ASTM D1401

Four ball test (PB value) ≥ 1200N ASTM D2783

4、 Application Guide

1. Applicable process

Upgrading from dry cutting to wet cutting: replacing traditional dry grinding to solve dust pollution and tool wear problems.

Precision grinding processing parameters:

Recommended oil pressure: 0.4-0.6MPa

Flow rate: 8-12 L/min (adjusted according to gear module)

2. Usage taboos

? Prohibited from mixing with cutting fluid

When the working temperature exceeds 80 ℃, the auxiliary cooling system needs to be activated

5、 Packaging and Quality Assurance

Packaging specifications: 18L/drum (iron drum), 200L/drum

Shelf life: unopened for 36 months (stored in a dark environment at 5-30 ℃)

磨齒油/切削油（純油型）?

——精密齒輪加工專用 高效潤滑·零殘留·長壽命?

一、產品定位?

?高精度磨齒機床?、 ?螺旋錐齒輪加工?、 ?硬齒面輪齒精銑? 等場景設計，適用于 ?汽車變速箱齒輪?、 ?風電齒輪箱?、 ?機器人減速器? 等端制造領域，提供 ?潤滑-冷卻-防銹-清潔? 解決方案。

二、產品特性?
1. 技術突破?
極壓潤滑技術?：添加 ?硫化鉬顆粒?，在齒輪與刀具接觸面形成 ?抗磨分子膜?，降低摩擦系數達 ?40%?，延長刀具壽命 ?30%+?。
動態熱管理?： ?熱傳導配方?，瞬間吸收加工熱量，控制工件溫升 ?≤5℃?，避免齒輪微觀形變。
零殘留配方?：加工后油膜 ?自動揮發分解?，無殘留碳化層，省去二次清洗工序。
2. 環保與安全?
低揮發性?：工作區VOC排放 ?＜10ppm?，保障操作人員健康。
3. 增效降本?
換油周期延長?：抗氧化穩定性提升，連續使用 ?800小時? 性能無衰減。
兼容性卓越?：適配 ?格里森（Gleason）?、 ?卡普（KAPP）?、 ?秦川（Qinchuan）? 等主流磨齒機型。
三、技術參數?
項目? ?參數值? ?測試標準?
運動粘度（40℃）*** mm2/s ISO 3104
閃點（開口） ≥180℃ ISO 2592
傾點 ≤-18℃ ISO 3016
抗乳化性（40-37-3） 15分鐘完全分離 ASTM D1401
四球試驗（PB值） ≥1200N ASTM D2783
四、應用指南?
1. 適用工藝?
干切轉濕切升級?：替代傳統干式磨齒，解決粉塵污染與刀具損耗問題。
精磨加工參數?：
推薦油壓： ?0.4-0.6MPa?
流量： ?8-12L/min?（根據齒輪模數調整）
2. 使用禁忌?
? 禁止與 ?切削液? 混合使用
? 工作溫度超過 ?80℃? 時需啟動輔助冷卻系統
五、包裝與質保?
包裝規格?：18L/桶（鐵桶）、200L/桶
保質期?： ?36個月?（避光存放于5-30℃環境）

DRK德潤克品牌廠家銷售德潤克 200L，針對德潤克 200L客戶提供相關咨詢服務，需要了解德潤克 200L型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。

 

相關產品

 

 

公司簡介

 

其它地區 潤滑油脂 類似信息：