• 規(guī)格：1kg
• 品牌：克魯勃
• 用途：軸承

Description
Klüberalfa XZ 3-1 is a rapidly evaporating dispersant, solvent and
detergent for use in combination with PFPE lubricants.
Its chemical composition is similar to that of perfluorinated
polyether (PFPE). For this reason, lubricants based on PFPE are
solved or dispersed in Klüberalfa XZ 3-1.
Klüberalfa XZ 3-1 is not a chlorinated fluorocarbon (CFC) and is
therefore not subject to the CFC/halon prohibition ordinance.
Application
As solvent and detergent:
Klüberalfa XZ 3-1 may be used to clean friction points prior to the
application of PFPE products such as BARRIERTA L55/2. When
used on clean surfaces, both the adhesion and the performance
of such lubricants are significantly improved.
To attain optimum lubrication results, we recommend cleaning
the friction point prior to initial application first with white spirit
180/210 and then with Klüberalfa XZ 3-1. Prior to initial
lubrication, the friction point should be bright (i.e. free of any
residues) and free of dirt particles.
As a dispersant:
PFPE greases dispersed with Klüberalfa XZ 3-1 are used for
minimum-quantity lubrication of bearings, chains, small gears,
seals and many other components.
With Klüberalfa XZ 3-1, the active substance content in
dispersions of the Klüberalfa product family can be adjusted to
individual needs without difficulty.
Due to its high dispersive capacity, Klüberalfa XZ 3-1 is used as a
flushing fluid to remove used PFPE grease from components that
are difficult to clean.
The cleaned surfaces remain free of grease and bright. It may be
advisable to protect them against corrosion after cleaning.
Food-processing and pharmaceutical industries:
Klüberalfa XZ 3-1 is NSF H1 registered and therefore complies
with FDA 21 CFR § 178.3570. The product was developed for
incidental contact with products and packaging materials in the
food-processing, cosmetics, pharmaceutical or animal feed
industries. The use of Klüberalfa XZ 3-1 can contribute to
increase reliability of your production processes. We nevertheless
recommend conducting an additional risk analysis, e.g. HACCP.
Application notes
To prevent evaporation losses of the product, the container
should be tightly closed after use.
Behaviour towards elastomers and plastics
When in contact with Klüberalfa XZ 3-1 for a relatively short time,
elastomers or plastics are in general not expected to suffer
damage. Nevertheless we recommend testing compatibility with
the material to be used, especially prior to series application.
Material safety data sheets
Material safety data sheets can be downloaded or requested via
our website . You may also obtain them
through your contact person at Klüber Lubrication.

東莞市灝瑞潤滑油科技有限公司銷售克魯勃 1kg，針對克魯勃 1kg客戶提供相關咨詢服務，需要了解克魯勃 1kg型號尺寸、重量、價格、安裝、維護等資料請與我們聯(lián)系。

 

相關產品

 

 

公司簡介

 

其它地區(qū) 潤滑油脂 類似信息：